OVERHAUL REBUILD KIT FOR CATERPILLAR C15 | NEW #C15601-010

Rectangular Ring Dimensions: 5.70in x .142in x .40in) and made of a peroxide cured green Teflon coat.

C15 Engine Specifications:
Year: 1999-2007
Liter: 15.2
CID: 928
Cylinders: L 6
Bore/Stroke: 5.4000-5.4020″, 6.7320″
Compression Ratio: –
Firing Order: 1-5-3-6-2-4
Comments: Diesel SOHC Electronic, Similar to 3406E, Non-Acert

Tune-Up Specifications:
Intake Valve Lash: .015″
Exhaust Valve Lash: .030″

Cylinder Block Specifications:
Cylinder Bore Diameter: 5.4000-5.4020″
Torque Plate: Spacer Plate: .337-.339″
Deck Height: 16.744-16.756″, Minimum Height is 16.733″
Measured At: C/Maine Deck
Maine to Pan Rail Distance: 6.496-6.504″

Piston Specifications:
Piston to Rod Assembly Orientation: Number on Rod Opposite Previous Camshaft Side
Piston Pin Diameter: 2.1652-2.1656″ or 2.3635″
Piston Pin Bore Diameter:2.1659-2.1663″ or 2.3633-2.3639″

Housing Bore Specifications:
Main Bore Diameter:5.1133-5.1143″
Main Cap Torque: 180-200 FT/LBS, +115-125º
Camshaft Bore Diameter: 3.5810-3.5830″

Cylinder Sleeve Specifications:
Sleeve Protrusion: .001-.006″
Sleeve Flange Height:.3492-.3508″

Cylinder Block Lower Bore Specifications:
Inside Diameter:6.0585-6.0600″ lower bore ID

Tips:
Make sure to check the condition of your cylinder head before installing cylinder liners. Cylinder heads in imperfect condition may lead to cylinder liner damage.