ATS01N222QN Schneider soft starter 11KW22A 380 volt power supply voltage spot warranty for one year
- Name: ATS01N222QN Schneider soft starter 11KW22A 380 volt power supply voltage spot warranty for one year
- Brand: Schneider
- Model: ATS01N222QN
- MOQ. : 1
- Warranty Time : 1 Year
- Certificates: ISO9001
- Price:
- Contact Person: Ms. Ma Meiying
- Email: sales@upalhd.com
- Email: sales.upalhd@hotmail.com
- Mobile-1: +86-16622133544
- Phone-2: +86-16602136043
Share to:
- Contact Peroson: Ms. Raihana
- Email: sales@upalhd.com
- Email: salse.upalhd@hotmail.com
- Phone-1: +86-16602136043
- Phone-2: +86-15557972300
Aditional Informations
ATS01N222QN Schneider soft starter 11KW22A 380 volt power supply voltage spot warranty for one year
Range of product | Altistart 01 |
---|---|
Product or component type | Soft starter |
Product destination | Asynchronous motors |
Product specific application | Simple machine |
Device short name | ATS01 |
Network number of phases | 3 phases |
[Us] rated supply voltage | 380…415 V – 10…10 % |
Motor power kW | 11 kW, 3 phases at 380…415 V 7.5 kW, 3 phases at 380…415 V |
IcL starter rating | 22 A |
Utilisation category | AC-53B conforming to EN/IEC 60947-4-2 |
Current consumption | 110 A at nominal load |
Type of start | Start with voltage ramp |
Power dissipation in W | 124.5 W in transient state 4.5 W at full load and at end of starting |
Assembly style | With heat sink |
Function available | Integrated bypass |
Supply voltage limits | 342…456 V |
Supply frequency | 50…60 Hz – 5…5 % |
Network frequency | 47.5…63 Hz |
Output voltage | <= power supply voltage |
[Uc] control circuit voltage | Built into the starter |
Starting time | 1 s / 100 5 s / 20 10 s / 10 Adjustable from 1 to 10 s |
Deceleration time symb | Adjustable from 1 to 10 s |
Starting torque | 30…80 % of starting torque of motor connected directly on the line supply |
Discrete input type | Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm |
Discrete input voltage | 24…40 V |
Discrete input logic | Positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA |
Discrete output current | 2 A DC-13 3 A AC-15 |
Discrete output type | Open collector logic LO1 end of starting signal Relay outputs R1A, R1C NO |
Discrete output voltage | 24 V (voltage limits: 6…30 V) open collector logic |
Minimum switching current | 10 mA at 6 V DC for relay outputs |
Maximum switching current | Relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load |
Display type | 1 LED (green) for starter powered up 1 LED (yellow) for nominal voltage reached |
Tightening torque | 0.5 N.m 1.9…2.5 N.m |
Electrical connection | 4 mm screw clamp terminal – rigid 1 1…10 mm² AWG 8 power circuit Screw connector – rigid 1 0.5…2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal – rigid 2 1…6 mm² AWG 10 power circuit Screw connector – rigid 2 0.5…1 mm² AWG 17 control circuit Screw connector – flexible with cable end 1 0.5…1.5 mm² AWG 16 control circuit 4 mm screw clamp terminal – flexible without cable end 1 1.5…10 mm² AWG 8 power circuit Screw connector – flexible without cable end 1 0.5…2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal – flexible with cable end 2 1…6 mm² AWG 10 power circuit 4 mm screw clamp terminal – flexible without cable end 2 1.5…6 mm² AWG 10 power circuit Screw connector – flexible without cable end 2 0.5…1.5 mm² AWG 16 control circuit |
Marking | CE |
Operating position | Vertical +/- 10 degree |
Height | 154 mm |
Width | 45 mm |
Depth | 131 mm |
Net weight | 0.56 kg |
Compatibility code | ATS01N2 |
Motor power range AC-3 | 7…11 kW at 380…440 V 3 phases |
Motor starter type | Soft starter |
Electromagnetic compatibility | Conducted and radiated emissions level B conforming to CISPR 11 Conducted and radiated emissions level B conforming to IEC 60947-4-2 Damped oscillating waves level 3 conforming to IEC 61000-4-12 Electrostatic discharge level 3 conforming to IEC 61000-4-2 EMC immunity conforming to EN 50082-1 EMC immunity conforming to EN 50082-2 Harmonics conforming to IEC 1000-3-2 Harmonics conforming to IEC 1000-3-4 Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6 Immunity to electrical transients level 4 conforming to IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11 Voltage/current impulse level 3 conforming to IEC 61000-4-5 |
Standards | EN/IEC 60947-4-2 |
Product certifications | CSA UL CCC B44.1-96/ASME A17.5 for starter wired to the motor delta terminal C-Tick GOST |
IP degree of protection | IP20 |
Pollution degree | 2 conforming to EN/IEC 60947-4-2 |
Vibration resistance | 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6 |
Shock resistance | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
Relative humidity | 5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3 |
Ambient air temperature for operation | -10…40 °C (without derating) 40…50 °C (with current derating of 2 % per °C) |
Ambient air temperature for storage | -25…70 °C conforming to EN/IEC 60947-4-2 |
Operating altitude | <= 1000 m without derating > 1000 m with current derating of 2.2 % per additional 100 m |
Unit Type of Package 1 | PCE |
Number of Units in Package 1 | 1 |
Package 1 Height | 5.7 cm |
Package 1 Width | 15.1 cm |
Package 1 Length | 17.2 cm |
Package 1 Weight | 672.0 g |
Unit Type of Package 2 | P06 |
Number of Units in Package 2 | 112 |
Package 2 Height | 77.0 cm |
Package 2 Width | 80.0 cm |
Package 2 Length | 60.0 cm |
Package 2 Weight | 88.34 kg |
Unit Type of Package 3 | S03 |
Number of Units in Package 3 | 14 |
Package 3 Height | 30.0 cm |
Package 3 Width | 30.0 cm |
Package 3 Length | 40.0 cm |
Package 3 Weight | 9.952 kg |
Warranty | 18 months |
FAQ ( frequently ask questions )
A: inquiry→quotation→confirm→send PI→make the payment→arrange the parts→delivery→receive the parts
A: By sea to your nearest port
By air to your nearest airport
By express (DHL,UPS,FEDEX,TNT,EMS)to your door
When your order shipping out . we will provide you a tracking number. then you can know clearly the status of the goods
A: Motsly parts we have stock before you want to book with us pls email us and confirm the delivery time and price. Usually 1-5 working days.
DHL | Around 3-5 working days |
---|---|
FedEx | Around 3-5 working days |
UPS/TNT | Around 6-8 working days |
EMS | Around 10-15 working days |
AIR | Around 5-7 working days |
SEA | Around 15-30 working days |
A: Of course, common products are allowed to be exchanged as long as you pay the freight and custom cost
A: Yes, we have warranty for our parts. 3 months for PCB, 2 years for original roller and other roller, 3-5 years for COMI roller and 1 year for Yaskawa inverter. Please contact us to get more information for other products
A: You can send it back to repair ,but the freight and repair charge will be paid by you.
A: TT, Western Union, Pay pal, You can choose a convinient way for you .
Kindly contact our staff to get more answers. Thanks for your cooperation!!!”