ATV212WD30N4, 30kw inverter ATV212 spot free shipping.
- Name: ATV212WD30N4, 30kw inverter ATV212 spot free shipping.
- Brand: Schneider
- Model: ATV212WD30N4
- MOQ. : 1
- Warranty Time : 1 Year
- Certificates: ISO9001
- Price:
- Contact Person: Ms. Ma Meiying
- Email: sales@upalhd.com
- Email: sales.upalhd@hotmail.com
- Mobile-1: +86-16622133544
- Phone-2: +86-16602136043
Share to:
- Contact Peroson: Ms. Raihana
- Email: sales@upalhd.com
- Email: salse.upalhd@hotmail.com
- Phone-1: +86-16602136043
- Phone-2: +86-15557972300
Aditional Informations
PRODUCT INFORMATION OF SCHNEIDER ATV212WD30N4, 30kw inverter ATV212 spot free shipping.
Device short name | ATV212 |
---|---|
Product destination | Asynchronous motors |
Phase | 3 phase |
motor power kW | 30 kW |
Maximum Horse Power Rating | 40 hp |
Supply voltage limits | 323…528 V |
supply frequency | 50…60 Hz – 5…5 % |
line current | 44.7 A 480 V 56.7 A 380 V |
Range of Product | Altivar 212 |
Product or Component Type | Variable speed drive |
Product Specific Application | Pumps and fans in HVAC |
Communication Port Protocol | BACnet METASYS N2 APOGEE FLN LonWorks Modbus |
[Us] rated supply voltage | 380…480 V – 15…10 % |
EMC filter | Class C2 EMC filter integrated |
IP degree of protection | IP55 |
apparent power | 44.6 kVA 380 V |
continuous output current | 58.5 A 380 V 58.5 A 460 V |
maximum transient current | 64.4 A 60 s |
Speed drive output frequency | 0.5…200 Hz |
speed range | 1…10 |
speed accuracy | +/- 10 % of nominal slip 0.2 Tn to Tn |
local signalling | For DC bus energized 1 LED (red) |
Output voltage | <= power supply voltage |
Isolation | Electrical between power and control |
type of cable | Without mounting kit 1 IEC cable 113 °F (45 °C), copper 90 °C / XLPE/EPR Without mounting kit 1 IEC cable 113 °F (45 °C), copper 70 °C / PVC With UL Type 1 kit 3 UL 508 cable 104 °F (40 °C), copper 75 °C / PVC |
electrical connection | VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES terminal 0.00 in² (2.5 mm²) / AWG 14 L1/R, L2/S, L3/T terminal 0.08 in² (50 mm²) / AWG 1/0 |
tightening torque | 5.31 lbf.in (0.6 N.m) VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES) 212.42 lbf.in (24 N.m), 212 lb.in L1/R, L2/S, L3/T) |
supply | Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 A overload and short-circuit protection Internal supply 24 V DC 21…27 V), <200 A overload and short-circuit protection |
sampling duration | 2 ms +/- 0.5 ms F discrete 2 ms +/- 0.5 ms R discrete 2 ms +/- 0.5 ms RES discrete 3.5 ms +/- 0.5 ms VIA analog 22 ms +/- 0.5 ms VIB analog |
response time | FM 2 ms +/- 0.5 ms analog FLA, FLC 7 ms +/- 0.5 ms discrete FLB, FLC 7 ms +/- 0.5 ms discrete RY, RC 7 ms +/- 0.5 ms discrete |
accuracy | +/- 0.6 % VIA) for a temperature variation 60 °C +/- 0.6 % VIB) for a temperature variation 60 °C +/- 1 % FM) for a temperature variation 60 °C |
linearity error | VIA +/- 0.15 % of maximum value input VIB +/- 0.15 % of maximum value input FM +/- 0.2 % output |
analogue output type | FM switch-configurable voltage 0…10 V DC 7620 Ohm 10 bits FM switch-configurable current 0…20 mA 970 Ohm 10 bits |
discrete output type | Configurable relay logic FLA, FLC) NO – 100000 cycles Configurable relay logic FLB, FLC) NC – 100000 cycles Configurable relay logic RY, RC) NO – 100000 cycles |
minimum switching current | 3 mA 24 V DC configurable relay logic |
maximum switching current | 5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R) 5 A 30 V DC resistive cos phi = 1 L/R = 0 ms FL, R) 2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL, R) 2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL, R) |
discrete input type | F programmable 24 V DC level 1 PLC 4700 Ohm R programmable 24 V DC level 1 PLC 4700 Ohm RES programmable 24 V DC level 1 PLC 4700 Ohm |
discrete input logic | Positive logic (source) F, R, RES), <= 5 V, >= 11 V Negative logic (sink) F, R, RES), >= 16 V, <= 10 V |
dielectric strength | 3535 V DC between earth and power terminals 5092 V DC between control and power terminals |
insulation resistance | >= 1 mOhm 500 V DC for 1 minute |
frequency resolution | Display unit 0.1 Hz Analog input 0.024/50 Hz |
Communication Service | Read holding registers (03) 2 words maximum Time out setting from 0.1 to 100 s Read device identification (43) Write multiple registers (16) 2 words maximum Monitoring inhibitable Write single register (06) |
option card | Communication card LonWorks |
Functionality | Mid |
Specific application | HVAC |
Discrete output number | 2 |
Analogue input number | 2 |
analogue input type | VIA switch-configurable voltage 0…10 V DC 24 V max 30000 Ohm 10 bits VIB configurable voltage 0…10 V DC 24 V max 30000 Ohm 10 bits VIB configurable PTC probe 0…6 probes 1500 Ohm VIA switch-configurable current 0…20 mA 250 Ohm 10 bits |
Analogue output number | 1 |
Physical interface | 2-wire RS 485 |
Connector Type | 1 RJ45 1 open style |
Transmission Rate | 9600 bps or 19200 bps |
Transmission frame | RTU |
Number of addresses | 1…247 |
Data format | 8 bits, 1 stop, odd even or no configurable parity |
Type of polarization | No impedance |
Asynchronous motor control profile | Flux vector control without sensor, standard Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo) Voltage/frequency ratio – Energy Saving, quadratic U/f Voltage/frequency ratio, 2 points Voltage/frequency ratio, 5 points |
Torque accuracy | +/- 15 % |
transient overtorque | 120 % of nominal motor torque +/- 10 % 60 s |
Acceleration and deceleration ramps | Linear adjustable separately from 0.01 to 3200 s Automatic based on the load |
Motor slip compensation | Not available in voltage/frequency ratio motor control Adjustable Automatic whatever the load |
switching frequency | 6…16 kHz adjustable 8…16 kHz with derating factor |
Nominal switching frequency | 8 kHz |
Braking to standstill | By DC injection |
Network Frequency | 47.5…63 Hz |
Prospective line Isc | 22 kA |
protection type | Overheating protection drive Thermal power stage drive Short-circuit between motor phases drive Input phase breaks drive Overcurrent between output phases and earth drive Overvoltages on the DC bus drive Break on the control circuit drive Against exceeding limit speed drive Line supply overvoltage and undervoltage drive Line supply undervoltage drive Against input phase loss drive Thermal protection motor Motor phase break motor With PTC probes motor |
Width of ATV212WD30N4 | 11.18 in (284 mm) |
Height of ATV212WD30N4 | 28.35 in (720 mm) |
Depth of ATV212WD30N4 | 12.40 in (315 mm) |
Product Weight | 109.13 lb(US) (49.5 kg) |
pollution degree | 3 IEC 61800-5-1 |
IP degree of protection | IP55 EN/IEC 61800-5-1 IP55 EN/IEC 60529 |
vibration resistance | 1.5 mm 3…13 Hz)EN/IEC 60068-2-6 1 gn 13…200 Hz)EN/IEC 60068-2-8 |
shock resistance | 15 gn 11 ms IEC 60068-2-27 |
environmental characteristic | Classes 3C1 IEC 60721-3-3 Classes 3S2 IEC 60721-3-3 |
noise level of ATV212WD30N4 | 59.9 dB 86/188/EEC |
operating altitude | 3280.84…9842.52 ft (1000…3000 m) limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m <= 3280.84 ft (1000 m) without derating |
relative humidity | 5…95 % without condensation IEC 60068-2-3 5…95 % without dripping water IEC 60068-2-3 |
ambient air temperature for operation | 14…104 °F (-10…40 °C) without derating) 104…122 °F (40…50 °C) with derating factor) |
Operating position | Vertical +/- 10 degree |
Product Certifications | C-tick CSA UL NOM 117 |
Marking of ATV212WD30N4 | CE |
Standards | IEC 61800-3 environments 1 category C2 EN 61800-3 environments 1 category C2 IEC 61800-5-1 EN 61800-3 category C2 IEC 61800-3 environments 2 category C2 EN 61800-3 environments 1 category C1 IEC 61800-3 environments 2 category C3 EN 55011 class A group 1 IEC 61800-3 category C2 EN 61800-3 environments 1 category C3 EN 61800-5-1 IEC 61800-3 environments 1 category C1 EN 61800-3 environments 2 category C3 IEC 61800-3 environments 2 category C1 EN 61800-3 category C3 IEC 61800-3 environments 1 category C3 EN 61800-3 environments 2 category C2 EN 61800-3 environments 2 category C1 EN 61800-3 IEC 61800-3 IEC 61800-3 category C3 |
Assembly style | With heat sink |
electromagnetic compatibility | Electrostatic discharge immunity test level 3 IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 IEC 61000-4-4 1.2/50 µs – 8/20 µs surge immunity test level 3 IEC 61000-4-5 Conducted radio-frequency immunity test level 3 IEC 61000-4-6 Voltage dips and interruptions immunity test IEC 61000-4-11 |
Regulation loop | Adjustable PI regulator |
Ambient Air Temperature for Storage | -13…158 °F (-25…70 °C) |
FAQ ( frequently ask questions )
A: inquiry→quotation→confirm→send PI→make the payment→arrange the parts→delivery→receive the parts
A: By sea to your nearest port
By air to your nearest airport
By express (DHL,UPS,FEDEX,TNT,EMS)to your door
When your order shipping out . we will provide you a tracking number. then you can know clearly the status of the goods
A: Motsly parts we have stock before you want to book with us pls email us and confirm the delivery time and price. Usually 1-5 working days.
DHL | Around 3-5 working days |
---|---|
FedEx | Around 3-5 working days |
UPS/TNT | Around 6-8 working days |
EMS | Around 10-15 working days |
AIR | Around 5-7 working days |
SEA | Around 15-30 working days |
A: Of course, common products are allowed to be exchanged as long as you pay the freight and custom cost
A: Yes, we have warranty for our parts. 3 months for PCB, 2 years for original roller and other roller, 3-5 years for COMI roller and 1 year for Yaskawa inverter. Please contact us to get more information for other products
A: You can send it back to repair ,but the freight and repair charge will be paid by you.
A: TT, Western Union, Pay pal, You can choose a convinient way for you .
Kindly contact our staff to get more answers. Thanks for your cooperation!!!”