Aditional Informations

PRODUCT INFORMATION OF 150-F60NBDB Rockwell AB SMC Flex soft starter current 60A.

With display	Yes
Voltage type for actuating	AC
Rated operating voltage Ue	200 V
Rated control supply voltage at AC 50 Hz	100 V
Rated control supply voltage at AC 60 Hz	100 V
Overload current for line connected devices	12 A
Overload current for delta connected devices	20.8 A
Controller type	Soft starter
Control options	Pump control
Trip classes	10, 15, 20 and 30
Trip current rating	117% of motor FLC
Transformer control module	75VA @ 100…240V AC (-15%, +10%)
Heatsink fan rating	20VA @ 110/120V AC or 220/240V AC
DV/DT protection	RC snubber network for power circuit
Repetitive peak inverse voltage rating	1400V per UL/CSA/NEMA for power circuit
Operating frequency	50/60 Hz for power circuit
Line connected motor power, max	50 Hp @ 575V AC, 60 Hz, 3-phase
Delta connected motor power, max	75 Hp @ 460V AC, 60 Hz, 3-phase
Rated impulse voltage	6000V per IEC for power circuit
Dielectric withstand	2500V per IEC for power circuit
Line connected motor current	12…60 A @ 500/575V AC, 3-phase
Delta connected motor current	20.8…104 A @ 500/575V AC, 3-phase
Transient protection	Metal oxide varistors: 220 Joules (optional) for power circuit
Insulation voltage	Rated 500V per IEC for power circuit
Rated operational voltage	200…480V AC (-15%, +10%) per UL/CSA/NEMA for power circuit
Input OFF-state current	<10 mA AC, <3 mA DC for control circuit @ input OFF-state voltage
Short-circuit protection device list	Standard fuse, circuit breaker and high capacity time delay class CC/J/L
Number of contacts	1 for auxiliary contacts
High capacity available fault current, max	70 kA @ 600V, maximum current 200 A time delay Class J or Class L fuse for inside delta connected motors
Type of current	AC for auxiliary contacts
Conventional thermal current (Ith)	AC/DC: 5 A for auxiliary contacts
Type of control circuit	Electromagnetic relay for auxiliary contacts
Type of contacts	Programmable NO/NC for auxiliary contacts
Utilization category	MG 1 per UL/CSA/NEMA for power circuit
Standard controller feature	Status indication: stopped, starting, stopping, at speed, alarm and fault
Standard available fault current, max	10 kA @ 200…600V, maximum standard fuse 400 A for delta device operational current rating
Optional controller feature	SMB smart motor braking control: provides motor braking without additional equipment for applications that require the motor to stop quickly, braking current is adjustable from 0…400% of the motor’s full-load current rating
Integrated motor overload protection	Yes
Short circuit protection device performance (SCPD) type	Type 1
Number of sensors, max	6 for PTC input ratings
Inrush current control module	5 A @ 24V DC (-15%, +10%)
Voltage at PTC terminals (RPTC = open), max	30V for PTC input ratings
Transient watts control module	60 W @ 24V DC (-15%, +10%)
Steady state watts control module	24 W @ 24V DC (-15%, +10%)
Voltage at PTC terminals (RPTC = 4 kΩ), max	<7.5 for PTC input ratings
Response time	800 ms for PTC input ratings
Inrush time control module	250 ms @ 24V DC (-15%, +10%)
Transient time control module	500 ms @ 24V DC (-15%, +10%)
Cold resistance of PTC sensor chain, max	1500 Ohm for PTC input ratings
Tachometer input	0…5V DC, 4.5V DC = 100% Speed
Allen bradley power supply control module, min	1606-XLP50E @ 24V DC (-15%, +10%)
Short circuit trip resistance	25 Ohm ± 10 Ohm for PTC input ratings
Response resistance	3400 Ohm ± 150 Ohm for PTC input ratings
Reset resistance	1600 Ohm ± 100 Ohm for PTC input ratings
Input OFF-state voltage, max	50V AC, 10V DC/12V AC for control circuit
Input ON-state voltage, min	85V AC, 19.2V DC/20.4V AC for control circuit
Lower line side cable size	0.8…2.5 mm2 (18…14 AWG) for power terminals
Lower load side cable size	0.8…2.5 mm2 (18…14 AWG) for power terminals
Upper load side cable size	2.5…50 mm2 (14…1 AWG) for load power terminals
Upper line side cable size	2.5…95 mm2 (14…3/0 AWG) for line power terminals
Rated operational current	3 A @ 120V AC, 1.5 A @ 240V AC for auxiliary contacts
Input ON-state current	20 mA @ 120V AC/40mA @ 240V AC, 7.6 mA @ 24V AC/DC for control circuit
Contact type	auxiliary contacts 19/20 (Aux #1), 29/30 (Aux #2), 31/32 (Aux #3) and 33/34 (Aux #4)

FAQ ( frequently ask questions )

Q:How to order?

A: inquiry→quotation→confirm→send PI→make the payment→arrange the parts→delivery→receive the parts

Q:Which shipping way is available and how to track?

A: By sea to your nearest port

By air to your nearest airport

By express (DHL,UPS,FEDEX,TNT,EMS)to your door

When your order shipping out . we will provide you a tracking number. then you can know clearly the status of the goods

Q: What is the delivery:

A: Motsly parts we have stock before you want to book with us pls email us and confirm the delivery time and price. Usually 1-5 working days.

DHL	Around 3-5 working days
FedEx	Around 3-5 working days
UPS/TNT	Around 6-8 working days
EMS	Around 10-15 working days
AIR	Around 5-7 working days
SEA	Around 15-30 working days

Q: Sorry, I place a wrong order, the goods are not the one I need, can I exchange it?

A: Of course, common products are allowed to be exchanged as long as you pay the freight and custom cost

Q: Do you have any warranty for your parts?

A: Yes, we have warranty for our parts. 3 months for PCB, 2 years for original roller and other roller, 3-5 years for COMI roller and 1 year for Yaskawa inverter. Please contact us to get more information for other products

Q: What should I do when the goods doesn’t work under warranty ?

A: You can send it back to repair ,but the freight and repair charge will be paid by you.

Q:Which payment way is available ?

A: TT, Western Union, Pay pal, You can choose a convinient way for you .

Kindly contact our staff to get more answers. Thanks for your cooperation!!!”