ATS22D62Q Schneider soft starter light load 30KW motor application 62A rated current three-phase 380V

ATS22D62Q Schneider soft starter light load 30KW motor application 62A rated current three-phase 380V

Share to:

Aditional Informations

Main

range of product Altistart 22
product or component type Soft starter
product destination Asynchronous motors
product specific application Pumps and fans
component name ATS22
network number of phases 3 phases
[Us] rated supply voltage 230…440 V – 15…10 %
motor power kW 15 kW 230 V
30 kW 400 V
30 kW 440 V
factory setting current 57 A
power dissipation in W 59 W for standard applications
utilisation category AC-53A
type of start Start with torque control (current limited to 3.5 In)
IcL starter rating 62 A for connection in the motor supply line for standard applications
IP degree of protection IP20
assembly style With heat sink
function available Internal bypass
supply voltage limits 195…484 V
supply frequency 50…60 Hz – 10…10 %
network frequency 45…66 Hz
device connection To the motor delta terminals
In the motor supply line
[Uc] control circuit voltage 230 V – 15…10 % 50/60 Hz
control circuit consumption 20 W
discrete output number 2
discrete output type Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
minimum switching current 100 mA at 12 V DC (relay outputs)
maximum switching current 5 A 250 V AC resistive 1 relay outputs
5 A 30 V DC resistive 1 relay outputs
2 A 250 V AC inductive 0.4 20 ms relay outputs
2 A 30 V DC inductive 7 ms relay outputs
discrete input number 3
discrete input type (LI1, LI2, LI3) logic, 5 mA 4.3 kOhm
discrete input voltage 24 V <= 30 V
discrete input logic Positive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
output current 0.4…1 Icl adjustable
PTC probe input 750 Ohm
communication port protocol Modbus
connector type 1 RJ45
communication data link Serial
physical interface RS485 multidrop
transmission rate 4800, 9600 or 19200 bps
installed device 31
protection type Phase failure: line
Thermal protection: motor
Thermal protection: starter
marking CE
type of cooling Forced convection
operating position Vertical +/- 10 degree
height 295 mm
width 145 mm
depth 207 mm
net weight 12 kg
Motor power range AC-3 15…25 kW at 200…240 V 3 phases
30…50 kW at 380…440 V 3 phases
motor starter type Soft starter
electromagnetic compatibility Conducted and radiated emissions level A conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Voltage/current impulse level 3 conforming to IEC 61000-4-5
standards EN/IEC 60947-4-2
product certifications C-Tick
CCC
UL
CSA
GOST
vibration resistance 1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6
1.5 mm (f= 2…13 Hz) conforming to EN/IEC 60068-2-6
shock resistance 15 gn for 11 ms conforming to EN/IEC 60068-2-27
noise level 45 dB
pollution degree Level 2 conforming to IEC 60664-1
relative humidity 0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
ambient air temperature for operation -10…40 °C (without derating)
40…60 °C (with current derating 2.2 % per °C)
ambient air temperature for storage -25…70 °C
operating altitude <= 1000 m without derating
> 1000…< 2000 m with current derating of 2.2 % per additional 100 m
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 31.0 cm
Package 1 Width 23.5 cm
Package 1 Length 36.0 cm
Package 1 Weight 8.262 kg
Unit Type of Package 2 P06
Number of Units in Package 2 6
Package 2 Height 73.5 cm
Package 2 Width 80.0 cm
Package 2 Length 60.0 cm
Package 2 Weight 64.0 kg
Warranty 18 months

FAQ ( frequently ask questions )

A: inquiry→quotation→confirm→send PI→make the payment→arrange the parts→delivery→receive the parts

A: By sea to your nearest port

By air to your nearest airport

By express (DHL,UPS,FEDEX,TNT,EMS)to your door

When your order shipping out . we will provide you a tracking number. then you can know clearly the status of the goods

A: Motsly parts we have stock before you want to book with us pls email us and confirm the delivery time and price. Usually 1-5 working days.

DHLAround 3-5 working days
FedExAround 3-5 working days
UPS/TNTAround 6-8 working days
EMSAround 10-15 working days
AIRAround 5-7 working days
SEAAround 15-30 working days

A: Of course, common products are allowed to be exchanged as long as you pay the freight and custom cost

A: Yes, we have warranty for our parts. 3 months for PCB, 2 years for original roller and other roller, 3-5 years for COMI roller and 1 year for Yaskawa inverter. Please contact us to get more information for other products

A: You can send it back to repair ,but the freight and repair charge will be paid by you.

A: TT, Western Union, Pay pal, You can choose a convinient way for you .

Kindly contact our staff to get more answers. Thanks for your cooperation!!!”

RElated Products

send your message to us