ATV212WD30N4, 30kw inverter ATV212 spot free shipping.

ATV212WD30N4, 30kw inverter ATV212 spot free shipping.

Share to:

Aditional Informations

PRODUCT INFORMATION OF SCHNEIDER ATV212WD30N4, 30kw inverter ATV212 spot free shipping.

Main || Schneider ATV212WD30N4

Device short name ATV212
Product destination Asynchronous motors
Phase 3 phase
motor power kW 30 kW
Maximum Horse Power Rating 40 hp
Supply voltage limits 323…528 V
supply frequency 50…60 Hz – 5…5 %
line current 44.7 A 480 V
56.7 A 380 V
Range of Product Altivar 212
Product or Component Type Variable speed drive
Product Specific Application Pumps and fans in HVAC
Communication Port Protocol BACnet
METASYS N2
APOGEE FLN
LonWorks
Modbus
[Us] rated supply voltage 380…480 V – 15…10 %
EMC filter Class C2 EMC filter integrated
IP degree of protection IP55
apparent power 44.6 kVA 380 V
continuous output current 58.5 A 380 V
58.5 A 460 V
maximum transient current 64.4 A 60 s
Speed drive output frequency 0.5…200 Hz
speed range 1…10
speed accuracy +/- 10 % of nominal slip 0.2 Tn to Tn
local signalling For DC bus energized 1 LED (red)
Output voltage <= power supply voltage
Isolation Electrical between power and control
type of cable Without mounting kit 1 IEC cable 113 °F (45 °C), copper 90 °C / XLPE/EPR
Without mounting kit 1 IEC cable 113 °F (45 °C), copper 70 °C / PVC
With UL Type 1 kit 3 UL 508 cable 104 °F (40 °C), copper 75 °C / PVC
electrical connection VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES terminal 0.00 in² (2.5 mm²) / AWG 14
L1/R, L2/S, L3/T terminal 0.08 in² (50 mm²) / AWG 1/0
tightening torque 5.31 lbf.in (0.6 N.m) VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)
212.42 lbf.in (24 N.m), 212 lb.in L1/R, L2/S, L3/T)
supply Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 A overload and short-circuit protection
Internal supply 24 V DC 21…27 V), <200 A overload and short-circuit protection
sampling duration 2 ms +/- 0.5 ms F discrete
2 ms +/- 0.5 ms R discrete
2 ms +/- 0.5 ms RES discrete
3.5 ms +/- 0.5 ms VIA analog
22 ms +/- 0.5 ms VIB analog
response time FM 2 ms +/- 0.5 ms analog
FLA, FLC 7 ms +/- 0.5 ms discrete
FLB, FLC 7 ms +/- 0.5 ms discrete
RY, RC 7 ms +/- 0.5 ms discrete
accuracy +/- 0.6 % VIA) for a temperature variation 60 °C
+/- 0.6 % VIB) for a temperature variation 60 °C
+/- 1 % FM) for a temperature variation 60 °C
linearity error VIA +/- 0.15 % of maximum value input
VIB +/- 0.15 % of maximum value input
FM +/- 0.2 % output
analogue output type FM switch-configurable voltage 0…10 V DC 7620 Ohm 10 bits
FM switch-configurable current 0…20 mA 970 Ohm 10 bits
discrete output type Configurable relay logic FLA, FLC) NO – 100000 cycles
Configurable relay logic FLB, FLC) NC – 100000 cycles
Configurable relay logic RY, RC) NO – 100000 cycles
minimum switching current 3 mA 24 V DC configurable relay logic
maximum switching current 5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R)
5 A 30 V DC resistive cos phi = 1 L/R = 0 ms FL, R)
2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL, R)
2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL, R)
discrete input type F programmable 24 V DC level 1 PLC 4700 Ohm
R programmable 24 V DC level 1 PLC 4700 Ohm
RES programmable 24 V DC level 1 PLC 4700 Ohm
discrete input logic Positive logic (source) F, R, RES), <= 5 V, >= 11 V
Negative logic (sink) F, R, RES), >= 16 V, <= 10 V
dielectric strength 3535 V DC between earth and power terminals
5092 V DC between control and power terminals
insulation resistance >= 1 mOhm 500 V DC for 1 minute
frequency resolution Display unit 0.1 Hz
Analog input 0.024/50 Hz
Communication Service Read holding registers (03) 2 words maximum
Time out setting from 0.1 to 100 s
Read device identification (43)
Write multiple registers (16) 2 words maximum
Monitoring inhibitable
Write single register (06)
option card Communication card LonWorks
Functionality Mid
Specific application HVAC
Discrete output number 2
Analogue input number 2
analogue input type VIA switch-configurable voltage 0…10 V DC 24 V max 30000 Ohm 10 bits
VIB configurable voltage 0…10 V DC 24 V max 30000 Ohm 10 bits
VIB configurable PTC probe 0…6 probes 1500 Ohm
VIA switch-configurable current 0…20 mA 250 Ohm 10 bits
Analogue output number 1
Physical interface 2-wire RS 485
Connector Type 1 RJ45
1 open style
Transmission Rate 9600 bps or 19200 bps
Transmission frame RTU
Number of addresses 1…247
Data format 8 bits, 1 stop, odd even or no configurable parity
Type of polarization No impedance
Asynchronous motor control profile Flux vector control without sensor, standard
Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo)
Voltage/frequency ratio – Energy Saving, quadratic U/f
Voltage/frequency ratio, 2 points
Voltage/frequency ratio, 5 points
Torque accuracy +/- 15 %
transient overtorque 120 % of nominal motor torque +/- 10 % 60 s
Acceleration and deceleration ramps Linear adjustable separately from 0.01 to 3200 s
Automatic based on the load
Motor slip compensation Not available in voltage/frequency ratio motor control
Adjustable
Automatic whatever the load
switching frequency 6…16 kHz adjustable
8…16 kHz with derating factor
Nominal switching frequency 8 kHz
Braking to standstill By DC injection
Network Frequency 47.5…63 Hz
Prospective line Isc 22 kA
protection type Overheating protection drive
Thermal power stage drive
Short-circuit between motor phases drive
Input phase breaks drive
Overcurrent between output phases and earth drive
Overvoltages on the DC bus drive
Break on the control circuit drive
Against exceeding limit speed drive
Line supply overvoltage and undervoltage drive
Line supply undervoltage drive
Against input phase loss drive
Thermal protection motor
Motor phase break motor
With PTC probes motor
Width of ATV212WD30N4 11.18 in (284 mm)
Height of ATV212WD30N4 28.35 in (720 mm)
Depth of ATV212WD30N4 12.40 in (315 mm)
Product Weight 109.13 lb(US) (49.5 kg)
pollution degree 3 IEC 61800-5-1
IP degree of protection IP55 EN/IEC 61800-5-1
IP55 EN/IEC 60529
vibration resistance 1.5 mm 3…13 Hz)EN/IEC 60068-2-6
1 gn 13…200 Hz)EN/IEC 60068-2-8
shock resistance 15 gn 11 ms IEC 60068-2-27
environmental characteristic Classes 3C1 IEC 60721-3-3
Classes 3S2 IEC 60721-3-3
noise level of ATV212WD30N4 59.9 dB 86/188/EEC
operating altitude 3280.84…9842.52 ft (1000…3000 m) limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m
<= 3280.84 ft (1000 m) without derating
relative humidity 5…95 % without condensation IEC 60068-2-3
5…95 % without dripping water IEC 60068-2-3
ambient air temperature for operation 14…104 °F (-10…40 °C) without derating)
104…122 °F (40…50 °C) with derating factor)
Operating position Vertical +/- 10 degree
Product Certifications C-tick
CSA
UL
NOM 117
Marking of ATV212WD30N4 CE
Standards IEC 61800-3 environments 1 category C2
EN 61800-3 environments 1 category C2
IEC 61800-5-1
EN 61800-3 category C2
IEC 61800-3 environments 2 category C2
EN 61800-3 environments 1 category C1
IEC 61800-3 environments 2 category C3
EN 55011 class A group 1
IEC 61800-3 category C2
EN 61800-3 environments 1 category C3
EN 61800-5-1
IEC 61800-3 environments 1 category C1
EN 61800-3 environments 2 category C3
IEC 61800-3 environments 2 category C1
EN 61800-3 category C3
IEC 61800-3 environments 1 category C3
EN 61800-3 environments 2 category C2
EN 61800-3 environments 2 category C1
EN 61800-3
IEC 61800-3
IEC 61800-3 category C3
Assembly style With heat sink
electromagnetic compatibility Electrostatic discharge immunity test level 3 IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 IEC 61000-4-4
1.2/50 µs – 8/20 µs surge immunity test level 3 IEC 61000-4-5
Conducted radio-frequency immunity test level 3 IEC 61000-4-6
Voltage dips and interruptions immunity test IEC 61000-4-11
Regulation loop Adjustable PI regulator
Ambient Air Temperature for Storage -13…158 °F (-25…70 °C)

FAQ ( frequently ask questions )

A: inquiry→quotation→confirm→send PI→make the payment→arrange the parts→delivery→receive the parts

A: By sea to your nearest port

By air to your nearest airport

By express (DHL,UPS,FEDEX,TNT,EMS)to your door

When your order shipping out . we will provide you a tracking number. then you can know clearly the status of the goods

A: Motsly parts we have stock before you want to book with us pls email us and confirm the delivery time and price. Usually 1-5 working days.

DHLAround 3-5 working days
FedExAround 3-5 working days
UPS/TNTAround 6-8 working days
EMSAround 10-15 working days
AIRAround 5-7 working days
SEAAround 15-30 working days

A: Of course, common products are allowed to be exchanged as long as you pay the freight and custom cost

A: Yes, we have warranty for our parts. 3 months for PCB, 2 years for original roller and other roller, 3-5 years for COMI roller and 1 year for Yaskawa inverter. Please contact us to get more information for other products

A: You can send it back to repair ,but the freight and repair charge will be paid by you.

A: TT, Western Union, Pay pal, You can choose a convinient way for you .

Kindly contact our staff to get more answers. Thanks for your cooperation!!!”

RElated Products

send your message to us