Keyence 2-axis pulse train unit KV-MC20V.
- Name: Keyence 2-axis pulse train unit KV-MC20V.
- Brand: Keyence
- Model: KV-MC20V
- MOQ. : 1
- Warranty Time : 1 Year
- Certificates: ISO9001
- Price:
- Contact Person: Ms. Ma Meiying
- Email: sales@upalhd.com
- Email: sales.upalhd@hotmail.com
- Mobile-1: +86-16622133544
- Phone-2: +86-16602136043
Share to:
- Contact Peroson: Ms. Raihana
- Email: sales@upalhd.com
- Email: salse.upalhd@hotmail.com
- Phone-1: +86-16602136043
- Phone-2: +86-15557972300
Aditional Informations
PRODUCT INFORMATION OF Keyence 2-axis pulse train unit KV-MC20V.
| Model | KV-MC20V | |||
| Type | Positioning/Motion unit | |||
| Number of control axes | 2 axes | |||
| Built-in device | Relay: 896 points (56 ch), Data memory: 54 words (high speed)/402 words (simple) | |||
| Output format of Keyence 2-axis pulse train unit KV-MC20V. | Differential line driver output (switchable among 1-pulse method, 2-pulse method, and A/B-phase method) | |||
| Connectable CPU units | KV-5500/5000/3000 | |||
| Max. output pulse | 4 MHz | |||
| Control mode | Position control | |||
| Control period | 1.0 ms | |||
| External interface | Input: Photocoupler input, Output: Open collector output (30 VDC 50 mA) | |||
| Input time constant | Each input is set in 11 stages for each block | |||
| Axis control function execution method | Ladder program, motion flow | |||
| Motion flow | Program capacity | 768 KB | ||
| Max. number of blocks | A total of 256 blocks in all flows | |||
| Max. number of flows | 32 | |||
| Number of simultaneous activities | Number of connectable axes × 2 | |||
| Position unit | mm, deg (angle), PLS (pulse count), decimal point position from 0 to 9 digits, unit conversion function available | |||
| Cumulative address | -2,147,483,648 to +2,147,483,647 instruction units | |||
| Positioning control | Positioning mode | Absolute value/relative value | ||
| Position setting range | -2,147,483,648 to +2,147,483,647 instruction units | |||
| Interpolation | Straight-line interpolation (up to 16 axes), arc interpolation, helical interpolation | |||
| Single operation address | -2,147,483,648 to +2,147,483,647 instruction units | |||
| Acceleration/deceleration curve | Straight-line, SIN, Bezier | |||
| Acceleration/deceleration time | 0 to 65,535 ms | |||
| Start-up time | Independent: 500 to 600 µs, Interpolation (straight-line 2 axes): 600 to 700 µs, Interpolation (arc 2 axes): 700 to 800 µs, Interpolation (helical 3 axes): 800 to 900 µs (only for KV-MC40V) (When the 1st axis is activated) Zero start: Input time constant +2 µs, Direct cache start: Max. 8 µs |
|||
| M-code | 1 to 65,000, WITH/AFTER mode | |||
| Sensor positioning | External input – based switching control from speed to position | |||
| Number of points | 800 points/axis | |||
| Synchronisation control | Input | Counter (KV-MX1 required), instruction coordinates, current coordinates (KV-ML16V only) | ||
| Clutch | Select from direct, slide, and follow-up | |||
| Cam | Resolution: 2048 to 32768, Amount of data: 4 to 64 (Number changes according to the resolution) | |||
| Contact output | 16 points (including 8 external output points) × 2 | |||
| Correction during operation | Correction via auxiliary input, phase correction, and lead angle correction | |||
| Fine control | Fine data work area | 8 MB | ||
| Built-in ROM capacity | 512 KB | |||
| Number of settings | Built-in ROM: 100, SD memory card: 1000 | |||
| Data capacity of one setting | Built-in ROM: 512 KB, SD memory card: 8 MB (KV-MX1 is required) | |||
| Origin return | Origin return method | Origin sensor edge/midpoint, push origin return, Dog type (“With Z phase” or “Without Z phase” can be selected), data set type, no limit switch | ||
| Speed control | Speed instruction range | – | ||
| Torque control | Torque instruction range | |||
| JOG/inching | Inching (The number of pulses can be specified), JOG (high speed/low speed) | |||
| Teaching | Current coordinate teaching and teaching from the counter current value are supported | |||
| Memory data | Point parameters 800 points (each axis), synchronisation parameters (each axis), fine setting (built-in ROM: 512 KB, expandable with a SD card), cam data motion flow setting, etc. can be read and written during RUN (with some restrictions) |
|||
| High-speed counter | When KV-MX1 is connected: INC 4 ch/ABS Grey, residual Grey, binary 2 ch (switched, based on settings), Max. 6.4 MHz (2-phase, 4 multiplication) | |||
| 5-V power output | 5 V ±5%, Max. 100 mA (total value) | |||
| Output display | Error status/Pulse output status | |||
| Self-diagnosis function | Diagnosis can be made through hardware error, various parameter errors, error number, and error messages | |||
| Parameter setting | Parameters can be set from KV-HPD1, “KV STUDIO,” and ladder programs | |||
| Data backup | Coordinates and error/warning history backup, parameter settings backup via flash ROM, 100,000 times switching | |||
| Internal current consumption | Main unit: 120 mA or less, external I/O: 80 mA or less | |||
| Weight of Keyence 2-axis pulse train unit KV-MC20V. | Approx. 170 g | |||
FAQ ( frequently ask questions )
A: inquiry→quotation→confirm→send PI→make the payment→arrange the parts→delivery→receive the parts
A: By sea to your nearest port
By air to your nearest airport
By express (DHL,UPS,FEDEX,TNT,EMS)to your door
When your order shipping out . we will provide you a tracking number. then you can know clearly the status of the goods
A: Motsly parts we have stock before you want to book with us pls email us and confirm the delivery time and price. Usually 1-5 working days.
| DHL | Around 3-5 working days |
|---|---|
| FedEx | Around 3-5 working days |
| UPS/TNT | Around 6-8 working days |
| EMS | Around 10-15 working days |
| AIR | Around 5-7 working days |
| SEA | Around 15-30 working days |
A: Of course, common products are allowed to be exchanged as long as you pay the freight and custom cost
A: Yes, we have warranty for our parts. 3 months for PCB, 2 years for original roller and other roller, 3-5 years for COMI roller and 1 year for Yaskawa inverter. Please contact us to get more information for other products
A: You can send it back to repair ,but the freight and repair charge will be paid by you.
A: TT, Western Union, Pay pal, You can choose a convinient way for you .
Kindly contact our staff to get more answers. Thanks for your cooperation!!!”
Users Today : 4
Users Yesterday : 7
Users This Month : 49
Total Users : 15986
Who's Online : 0
