Aditional Informations

PRODUCT INFORMATION OF Keyence base unit KV-NC32T.

Model				KV-NC32T
General specifications	Power voltage			24 VDC (+10%/-15%)
	Operating ambient temperature			0 to 55°C 32 to 131°F (no freezing)^*1
	Operating ambient humidity			5 to 95% RH (no condensation)
	Operating environment			As little dust and corrosive gas as possible
	Noise immunity			1500 V peak-to-peak or more, pulse duration 1 μs, 50 ns (based on noise simulator) Conforms to IEC standards (IEC61000-4-2/3/4/6)
	Withstand voltage			1500 VAC for 1 minute, between power supply terminal and I/O terminals and between all external terminals and case (1000 VAC for 1 minute, between power supply terminal and output terminals for the transistor output type expansion I/O unit)
	Insulation resistance			50 MΩ or more (500 VDC megger used to perform measurements between power supply terminal and input terminals, and between all external terminals and case)
	Storage temperature			−25 to +75°C −13 to +167°F
	Vibration resistance	Intermittent vibration	Frequency: 5 to 9 Hz	Amplitude: 3.5 mm 0.14″^*2
			Frequency: 9 to 150 Hz	Acceleration: 9.8 m/s² 32.2’/s²^*2
		Continuous vibration	Frequency: 5 to 9 Hz	Amplitude: 1.75 mm 0.07″^*2
			Frequency: 9 to 150 Hz	Acceleration: 4.9 m/s² 16.1’/s²^*2
	Shock resistance			Acceleration: 150 m/s² 492.1’/s², application time: 11 ms, three times in each of the X, Y, and Z directions
	Operating altitude			2000 m 6561.7′ or less
	Overvoltage category			I
	Pollution degree			2
Performance specifications	Calculation control method			Program storage method
	I/O control method			Refresh method
	Program language			Expanded ladder, KV Script, mnemonic
	Number of instructions			Basic instruction: 81 types and 182 instructions, Application instruction: 39 types and 56 instructions Calculation instruction: 123 types and 311 instructions, Expansion instruction: 92 types and 141 instructions Total: 335 types and 690 instructions
	Instruction execution speed			Basic instruction: 50 ns minimum, Application instruction: 170 ns minimum
	Program capacity			32k steps
	Maximum number of attachable I/O units			8
	Maximum number of I/O points			256
	Input relay/Output relay/Internal auxiliary relay	R		Total of 9600 points 1 bit (R000 to R59915)
	Link relay	B		8192 points 1 bit (B0 to B1FFF)
	Internal auxiliary relay	MR		9600 points 1 bit (MR000 to MR59915)
	Latch relay	LR		3200 points 1 bit (LR000 to LR19915)
	Control relay	CR		1440 points 1 bit (CR000 to CR8915)
	Timer	T		512 points 32 bits (T0 to T511)
	Counter	C		256 points 32 bits (C0 to C255)
	Data memory	DM		32768 points 16 bit (DM0 to DM32767)
	Link register	W		16384 points 16 bit (W0 to W3FFF)
	Temporary memory	TM		512 points 16 bit (TM0 to TM511)
	High-speed counter	CTH		3 points (CTH0 to CTH2) 32-bit automatic reset counter^3 (Input response: 100 kHz per single phase, 50 kHz per phase difference)^4
	High-speed counter comparator	CTC		6 points (CTC0 to CTC5) 32 bits, two points per high-speed counter
	Index register	Z		12 points 32 bit (Z01 to Z12)
	Control memory	CM		9000 points 16 bit (CM0 to CM8999)
	Positioning pulse output			3 axes Maximum output frequency: 100 kHz
	Base unit I/O			Input: 16 points output: 16 points Input common: 1 point Output common: 1 point
	Number of comments and labels that can be stored in the main unit	Device comment		20000 When a maximum-length ladder program is written with no labels.
		Label		28000 When a maximum-length ladder program is written with no device comments.
	Power off hold function	Program memory		Flash ROM can be rewritten 10000 times
		Device		Nonvolatile RAM^*5
	Clock function			±60 seconds/month (at 25°C 77°F)
	Self-diagnosis function			CPU error, RAM error, and other problems
Input specifications	Relay number			General input: R000 to R009 (10 points), High-speed A-phase and B-phase input: R010 to R015 (6 points)
	Input mode			24 VDC input (open collector)
	Maximum input voltage			26.4 VDC
	Rated input voltage			24 VDC (General input: 5.3 mA, High-speed A-phase and B-phase input: 6.5 mA^*6)
	Minimum ON voltage			19 VDC
	Maximum OFF current			1.5 mA
	Common method			All points/1 common (1 terminal)
	Circuit delay time			General input: OFF to ON: Max. 30 μs (Typ. 3.5 μs), ON to OFF: Max. 50 μs (Typ. 15 μs) High-speed A-phase and B-phase input: OFF to ON: Max. 2 μs (Typ. 1.1 μs), ON to OFF: Max. 2 μs (Typ. 0.3 μs) ^*7
	Input time constant			Normal: 10 ms, When the HSP instruction is used: 10 μs When CR2305 is turned ON: 10 μs to 10 ms, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.^*7
				Delay by input time constant Input time constant setting 10 μs: Digital filter 1.6 to 2 μs Input time constant setting 20 μs: Digital filter 9 to 12 μs Input time constant setting 110 μs: Digital filter 90 to 93 μs Input time constant setting 500 μs: Digital filter 300 to 400 μs Input time constant setting 1 ms: Digital filter 800 to 900 μs Input time constant setting 2.5 ms: Digital filter 2.3 to 2.4 ms Input time constant setting 5 ms: Digital filter 4.0 to 4.5 ms Input time constant setting 10 ms: Digital filter 9 to 9.5 ms
	Response frequency			(High-speed A-phase and B-phase input) Single phase: 100 kHz, phase difference: 50 kHz, 24 V ±10%, Duty 50%
Output specifications	Relay number			General output: R506 to R515 (10 points), High-speed output: R500 to R505 (6 points)
	Output mode			MOSFET (N-ch) output
	Rated load			30 VDC General output: 0.2 A (1.6 A/common), High-speed output: 0.3 A (1.6 A/common)
	Maximum OFF voltage			30 VDC
	Leakage current at OFF			100 μA or less
	Residual voltage at ON			0.6 VDC or less
	Common method			16 points/1 common
	ON/OFF response time			General output: OFF to ON: 100 μs (load of 1 mA or more), ON to OFF: 200 μs (load of 1 mA or more) High-speed output: OFF to ON: 2 μs (load of 7 mA or more), ON to OFF: 5 μs (load of 7 mA or more)
	Overcurrent protection			Protection provided for each common^*8
	Output frequency			High-speed output: 100 kHz (7 to 100 mA load)
Built-in serial port	Interface	Communication standard		RS-232C
		Connection		Modular connector
	Transmission specifications RS-232C	Baud rate		1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
		Transmission method		Full duplex
		Data format	Start bit	1 bit
			Data bits	7 bits, 8 bits
			Stop bits	1 bit, 2 bits
		Error detection	Parity	Even, odd, none
		Transmission distance		15 m 49.2′
		Number of transmission units		1
	Indication			Common between SD/RD SD: (green) RD: (red) The color may appear as orange during transmission.
Internal current consumption				260 mA
Weight				Approx. 220 g

FAQ ( frequently ask questions )

Q:How to order?

A: inquiry→quotation→confirm→send PI→make the payment→arrange the parts→delivery→receive the parts

Q:Which shipping way is available and how to track?

A: By sea to your nearest port

By air to your nearest airport

By express (DHL,UPS,FEDEX,TNT,EMS)to your door

When your order shipping out . we will provide you a tracking number. then you can know clearly the status of the goods

Q: What is the delivery:

A: Motsly parts we have stock before you want to book with us pls email us and confirm the delivery time and price. Usually 1-5 working days.

DHL	Around 3-5 working days
FedEx	Around 3-5 working days
UPS/TNT	Around 6-8 working days
EMS	Around 10-15 working days
AIR	Around 5-7 working days
SEA	Around 15-30 working days

Q: Sorry, I place a wrong order, the goods are not the one I need, can I exchange it?

A: Of course, common products are allowed to be exchanged as long as you pay the freight and custom cost

Q: Do you have any warranty for your parts?

A: Yes, we have warranty for our parts. 3 months for PCB, 2 years for original roller and other roller, 3-5 years for COMI roller and 1 year for Yaskawa inverter. Please contact us to get more information for other products

Q: What should I do when the goods doesn’t work under warranty ?

A: You can send it back to repair ,but the freight and repair charge will be paid by you.

Q:Which payment way is available ?

A: TT, Western Union, Pay pal, You can choose a convinient way for you .

Kindly contact our staff to get more answers. Thanks for your cooperation!!!”