Keyence controller KV-N24DT.
- Name: Keyence controller KV-N24DT.
- Brand: Keyence
- Model: KV-N24DT
- MOQ. : 1
- Warranty Time : 1 Year
- Certificates: ISO9001
- Price:
- Contact Person: Ms. Ma Meiying
- Email: sales@upalhd.com
- Email: sales.upalhd@hotmail.com
- Mobile-1: +86-16622133544
- Phone-2: +86-16602136043
Share to:
- Contact Peroson: Ms. Raihana
- Email: sales@upalhd.com
- Email: salse.upalhd@hotmail.com
- Phone-1: +86-16602136043
- Phone-2: +86-15557972300
Aditional Informations
PRODUCT INFORMATION OF Keyence controller KV-N24DT.
| Model | KV-N24DT | |||
| General specifications | Power voltage | 24 VDC (+10%/-15%) | ||
| Operating ambient temperature | 0 to 55°C 32 to 131°F (no freezing)*1*2 | |||
| Operating ambient humidity | 5 to 95% RH (no condensation)*1 | |||
| Operating environment | As little dust and corrosive gas as possible | |||
| Noise immunity | 1500 V peak-to-peak or more, pulse duration 1 μs, 50 ns (based on noise simulator), IEC standard compliant (IEC61000-4-2/3/4/6) | |||
| Withstand voltage | 1500 VAC for 1 minute, between power supply terminal and I/O terminals and between all external terminals and case | |||
| Insulation resistance | 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, and between all external terminals and case) | |||
| Output power supply voltage | − | |||
| Storage temperature | −25 to +75°C −13 to +167°F | |||
| Vibration resistance | Intermittent vibration | Frequency: 5 to 9 Hz | Amplitude: 3.5 mm 0.14″*3*4 | |
| Frequency: 9 to 150 Hz | Acceleration: 9.8 m/s2 32.2’/s2*3*4 | |||
| Continuous vibration | Frequency: 5 to 9 Hz | Amplitude: 1.75 mm 0.07″*3*4 | ||
| Frequency: 9 to 150 Hz | Acceleration: 4.9 m/s2 16.1’/s2*3*4 | |||
| Shock resistance | Acceleration: 150 m/s2 492.1’/s2, application time: 11 ms, three times in each of the X, Y, and Z directions | |||
| Operating altitude | 2000 m 6561.7′ or less | |||
| Overvoltage category | AC: II, DC: I | |||
| Pollution degree | 2 | |||
| Performance specifications | Calculation control method | Program storage method | ||
| I/O control method | Refresh method | |||
| Program language | Expanded ladder, KV Script, mnemonic | |||
| Number of instructions | Basic instruction: 81 types and 182 instructions, Application instruction: 39 types and 56 instructions, Calculation instruction: 123 types and 311 instructions, Expansion instruction: 92 types and 141 instructions, Total: 335 types and 690 instructions | |||
| Instruction execution speed | Basic instruction: 50 ns minimum, Application instruction: 170 ns minimum | |||
| Program capacity | 8k steps | |||
| Maximum number of attachable I/O units | 8 | |||
| Maximum number of I/O points | 256 (excluding the base unit I/O) | |||
| Input relay/Output relay/Internal auxiliary relay | R | Total of 9600 points 1 bit (R000 to R59915) | ||
| Link relay | B | 8192 points 1 bit (B0 to B1FFF) | ||
| Internal auxiliary relay | MR | 9600 points 1 bit (MR000 to MR59915) | ||
| Latch relay | LR | 3200 points 1 bit (LR000 to LR19915) | ||
| Control relay | CR | 1440 points 1 bit (CR000 to CR8915) | ||
| Timer | T | 512 points 32 bit (T0 to T511) | ||
| Counter | C | 256 points 32 bit (C0 to C255) | ||
| Data memory | DM | 32768 points 16 bit (DM0 to DM32767) | ||
| Link register | W | 16384 points 16 bit (W0 to W3FFF) | ||
| Temporary memory | TM | 512 points 16 bit (TM0 to TM511) | ||
| High-speed counter | CTH | 2 points (CTH0 to CTH1) 32-bit automatic reset counter*5(Input response: 100 kHz per single phase, 50 kHz per phase difference)*6 |
||
| High-speed counter comparator | CTC | 4 points (CTC0 to CTC3), 32 bits, two points per high-speed counter | ||
| Index register | Z | 12 points 32 bit (Z01 to Z12) | ||
| Control memory | CM | 9000 points 16 bit (CM0 to CM8999) | ||
| Positioning pulse output | 2 axes Maximum output frequency: 100 kHz |
|||
| Base unit I/O | Input: 14 points, output: 10 points Input common: 1 point Output common: 1 point |
|||
| Number of comments and labels that can be stored in the main unit | Device comment | 20000 When a maximum-length ladder program is written with no labels. |
||
| Label | 28000 When a maximum-length ladder program is written with no device comments. |
|||
| Power off hold function | Program memory | Flash ROM can be rewritten 10000 times | ||
| Device | Nonvolatile RAM*7 | |||
| Self-diagnosis function | CPU error, RAM error, and other problems | |||
| Input specifications | Relay number | General input: R000 to R003, R008 to R013 (10 points) High-speed A-phase and B-phase input: R004 to R007 (2 channels, 4 points in total) |
||
| Input mode | 24 VDC input (open collector) | |||
| Maximum input voltage | 26.4 VDC | |||
| Rated input voltage | 24 VDC (General input: 5.3 mA, High-speed A-phase and B-phase input: 6.5 mA*8) | |||
| Minimum ON voltage | 19 VDC | |||
| Maximum OFF current | 1.5 mA | |||
| Common method | General input: All points/1 common (1 terminal) High-speed A-phase and B-phase input: Shared common for all points (shared with general input) |
|||
| Circuit delay time | General input: OFF to ON: Max. 30 μs (Typ. 3.5 μs), ON to OFF: Max. 50 μs (Typ. 15 μs) High-speed A-phase and B-phase input: OFF to ON: Max. 2 μs (Typ. 1.1 μs), ON to OFF: Max. 2 μs (Typ. 0.3 μs) *9 |
|||
| Input time constant | Normal: 10 ms, When the HSP instruction is used: 10 µs When CR2305 is turned ON: 10 µs to 10 ms, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*9 |
|||
| Input time constant setting 10 μs: Digital filter 1.6 to 2 μs Input time constant setting 20 μs: Digital filter 9 to 12 μs Input time constant setting 110 μs: Digital filter 90 to 93 μs Input time constant setting 500 μs: Digital filter 300 to 400 μs Input time constant setting 1 ms: Digital filter 800 to 900 μs Input time constant setting 2.5 ms: Digital filter 2.3 to 2.4 ms Input time constant setting 5 ms: Digital filter 4.0 to 4.5 ms Input time constant setting 10 ms: Digital filter 9 to 9.5 ms |
||||
| Response frequency | (High-speed A-phase and B-phase input) Single phase: 100 kHz, phase difference: 50 kHz, 24 V ±10%, Duty 50% | |||
| Output specifications | Relay number | General output: R504 to R509 (6 points), High-speed output: R500 to R503 (4 points) | ||
| Output mode | MOSFET *10 | |||
| Rated load | 30 VDC, 0.5 A | |||
| Maximum OFF voltage | 30 VDC | |||
| Leakage current at OFF | 100 μA or less | |||
| Residual voltage at ON | 0.8 VDC or less (with 0.5 A output), 0.6 VDC or less (with 0.3 A output) | |||
| Common method | 8 to 10 points/1 common | |||
| ON/OFF response time | General output: OFF to ON: 100 μs (load of 1 mA or more), ON to OFF: 200 μs (load of 1 mA or more) High-speed output: OFF to ON: 2 μs (7 to 100 mA load), ON to OFF: 5 μs (7 to 100 mA load) |
|||
| Overcurrent protection | Protection provided for each common*11 | |||
| Output frequency | High-speed output: 100 kHz (7 to 100 mA load) | |||
| Built-in serial port | Interface | Communication standard | RS-232C | |
| Connection | Modular connector | |||
| Transmission specifications RS-232C | Baud rate | 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps | ||
| Transmission method | Full duplex | |||
| Data format | Start bit | 1 bit | ||
| Data bits | 7 bits, 8 bits | |||
| Stop bits | 1 bit, 2 bits | |||
| Error detection | Parity | Even, odd, none | ||
| Transmission distance | 15 m 49.2′ | |||
| Number of transmission units | 1 | |||
| Indication | SD (green), RD (red) | |||
| Internal current consumption | 160 mA | |||
| Weight | Approx. 390 g | |||
FAQ ( frequently ask questions )
A: inquiry→quotation→confirm→send PI→make the payment→arrange the parts→delivery→receive the parts
A: By sea to your nearest port
By air to your nearest airport
By express (DHL,UPS,FEDEX,TNT,EMS)to your door
When your order shipping out . we will provide you a tracking number. then you can know clearly the status of the goods
A: Motsly parts we have stock before you want to book with us pls email us and confirm the delivery time and price. Usually 1-5 working days.
| DHL | Around 3-5 working days |
|---|---|
| FedEx | Around 3-5 working days |
| UPS/TNT | Around 6-8 working days |
| EMS | Around 10-15 working days |
| AIR | Around 5-7 working days |
| SEA | Around 15-30 working days |
A: Of course, common products are allowed to be exchanged as long as you pay the freight and custom cost
A: Yes, we have warranty for our parts. 3 months for PCB, 2 years for original roller and other roller, 3-5 years for COMI roller and 1 year for Yaskawa inverter. Please contact us to get more information for other products
A: You can send it back to repair ,but the freight and repair charge will be paid by you.
A: TT, Western Union, Pay pal, You can choose a convinient way for you .
Kindly contact our staff to get more answers. Thanks for your cooperation!!!”
Users Today : 0
Users Yesterday : 9
Users This Month : 72
Total Users : 16009
Who's Online : 0
