Schneider inverter ATV610 series IP20 three-phase power 0.75KW-160KW

Schneider inverter ATV610 series IP20 three-phase power 0.75KW-160KW

Share to:

Aditional Informations

PRODUCT INFORMATION OF Schneider inverter ATV610 series IP20 three-phase power 0.75KW-160KW.

 

Main || Schneider inverter ATV610

Range of product Easy Altivar 610
Product or component type Variable speed drive
Product specific application Fan, pump, compressor, conveyor
Device short name ATV610
Variant of Schneider inverter ATV610 Standard version
Product destination Asynchronous motors
Mounting mode of Schneider inverter ATV610 Cabinet mount
EMC filter Integrated conforming to EN/IEC 61800-3 category C3 with 50 m
IP degree of protection of Schneider inverter ATV610 IP20
Type of cooling Forced convection
Supply frequency of Schneider inverter ATV610 50…60 Hz +/-5 %
Network number of phases 3 phases
[Us] rated supply voltage 380…460 V – 15…10 %
Motor power kW 0.75 kW for normal duty
0.37 kW for heavy duty
Motor power hp 1 hp for normal duty
0.5 hp for heavy duty
Line current of Schneider inverter ATV610 3.1 A at 380 V (normal duty)
2.6 A at 460 V (normal duty)
1.7 A at 380 V (heavy duty)
1.4 A at 460 V (heavy duty)
Prospective line Isc 5 kA
Apparent power of Schneider inverter ATV610 2.1 kVA at 460 V (normal duty)
1.1 kVA at 460 V (heavy duty)
Continuous output current 2.2 A at 4 kHz for normal duty
1.5 A at 4 kHz for heavy duty
Maximum transient current 2.4 A during 60 s (normal duty)
2.3 A during 60 s (heavy duty)
Asynchronous motor control profile of Schneider inverter ATV610 Constant torque standard
Optimized torque mode
Variable torque standard
Output frequency 0.0001…0.5 kHz
Nominal switching frequency 4 kHz
Switching frequency of Schneider inverter ATV610 2…12 kHz adjustable
Number of preset speeds of Schneider inverter ATV610 16 preset speeds
Communication port protocol Modbus serial
Option card Slot A: communication card, Profibus DP V1
Slot A: digital or analog I/O extension card
Slot A: relay output card
Output voltage <= power supply voltage
Motor slip compensation Not available in permanent magnet motor law
Adjustable
Automatic whatever the load
Can be suppressed
Acceleration and deceleration ramps S, U or customized
Linear adjustable separately from 0.01 to 9000 s
Braking to standstill By DC injection
Protection type Thermal protection: motor
Motor phase break: motor
Thermal protection: drive
Overheating: drive
Overcurrent between output phases and earth: drive
Overload of output voltage: drive
Short-circuit protection: drive
Motor phase break: drive
Overvoltages on the DC bus: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Line supply phase loss: drive
Overspeed: drive
Break on the control circuit: drive
Frequency resolution Display unit: 0.1 Hz
Analog input: 0.012/50 Hz
Electrical connection Control, screw terminal: 0.5…1.5 mm²
Line side, screw terminal: 2.5…16 mm²
Motor, screw terminal: 2.5…16 mm²
Connector type 1 RJ45 (on the remote graphic terminal) for Modbus serial
Physical interface 2-wire RS 485 for Modbus serial
Transmission frame RTU for Modbus serial
Transmission rate 4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial
Type of polarization No impedance for Modbus serial
Number of addresses 1…247 for Modbus serial
Method of access Slave
Supply External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
Local signalling 2 LEDs for local diagnostic
1 LED (yellow) for embedded communication status
2 LEDs (dual colour) for communication module status
1 LED (red) for presence of voltage
Width 145 mm
Height 297 mm
350 mm with EMC plate
Depth 203 mm
Net weight 2.4 kg
Analogue input number 3
Analogue input type AI1, AI2, AI3 software-configurable voltage: 0…10 V DC, impedance: 30 kOhm, resolution 12 bits
AI1, AI2, AI3 software-configurable current: 0…20 mA, impedance: 250 Ohm, resolution 12 bits
AI2, AI3 software-configurable temperature probe or water level sensor
Discrete input number 6
Discrete input type DI1…DI6 programmable as logic input, 24 V DC (<= 30 V), impedance: 3.5 kOhm
DI5, DI6 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)
Input compatibility DI1…DI6: logic input level 1 PLC conforming to EN/IEC 61131-2
DI5, DI6: pulse input level 1 PLC conforming to IEC 65A-68
Discrete input logic Positive logic (source): DI1…DI6 configurable logic input, < 5 V (state 0), > 11 V (state 1)
Negative logic (sink): DI1…DI6 configurable logic input, > 16 V (state 0), < 10 V (state 1)
Positive logic (source): DI5, DI6 configurable pulse input, < 0.6 V (state 0), > 2.5 V (state 1)
Analogue output number 2
Analogue output type Software-configurable current AQ1, AQ2: 0…20 mA, resolution 10 bits
Software-configurable voltage AQ1, AQ2: 0…10 V DC impedance 470 Ohm, resolution 10 bits
Sampling duration 5 ms +/- 0.1 ms (AI1, AI2, AI3) – analog input
2 ms +/- 0.5 ms (DI1…DI6)configurable – discrete input
5 ms +/- 1 ms (DI5, DI6)configurable – pulse input
10 ms +/- 1 ms (AQ1, AQ2) – analog output
Accuracy +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
+/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output
Linearity error AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input
AQ1, AQ2: +/- 0.2 % for analog output
Relay output number 3
Relay output type Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles
Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles
Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles
Refresh time Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms)
Minimum switching current Relay output R1, R2, R3: 5 mA at 24 V DC
Maximum switching current Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC
Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
Isolation Between power and control terminals
Insulation resistance > 1 MOhm 500 V DC for 1 minute to earth
Noise level 55 dB conforming to 86/188/EEC
Power dissipation in W 19 W(forced convection) at 380 V, switching frequency 4 kHz
23 W(natural convection) at 380 V, switching frequency 4 kHz
Operating position Vertical +/- 10 degree
Electromagnetic compatibility Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs – 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Pollution degree 2 conforming to EN/IEC 61800-5-1
Vibration resistance 1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6
1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6
Shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27
Relative humidity of Schneider inverter ATV610 5…95 % without condensation conforming to IEC 60068-2-3
Ambient air temperature for operation -15…45 °C (without derating)
45…60 °C (with derating factor)
Operating altitude of Schneider inverter ATV610 <= 1000 m without derating
1000…4800 m with current derating 1 % per 100 m
Environmental characteristic of Schneider inverter ATV610 Chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3
Dust pollution resistance class 3S3 conforming to EN/IEC 60721-3-3
Standards of Schneider inverter ATV610 EN/IEC 61800-3
Environment 2 category C3 EN/IEC 61800-3
EN/IEC 61800-5-1
IEC 60721-3
Marking CE

FAQ ( frequently ask questions )

A: inquiry→quotation→confirm→send PI→make the payment→arrange the parts→delivery→receive the parts

A: By sea to your nearest port

By air to your nearest airport

By express (DHL,UPS,FEDEX,TNT,EMS)to your door

When your order shipping out . we will provide you a tracking number. then you can know clearly the status of the goods

A: Motsly parts we have stock before you want to book with us pls email us and confirm the delivery time and price. Usually 1-5 working days.

DHLAround 3-5 working days
FedExAround 3-5 working days
UPS/TNTAround 6-8 working days
EMSAround 10-15 working days
AIRAround 5-7 working days
SEAAround 15-30 working days

A: Of course, common products are allowed to be exchanged as long as you pay the freight and custom cost

A: Yes, we have warranty for our parts. 3 months for PCB, 2 years for original roller and other roller, 3-5 years for COMI roller and 1 year for Yaskawa inverter. Please contact us to get more information for other products

A: You can send it back to repair ,but the freight and repair charge will be paid by you.

A: TT, Western Union, Pay pal, You can choose a convinient way for you .

Kindly contact our staff to get more answers. Thanks for your cooperation!!!”

RElated Products

send your message to us